Publicidad
Idiomas disponibles
Idiomas disponibles
English
Proper Hand Position (Fig. C, D)
WARNING: To reduce the risk of serious personal injury,
ALWAYS use proper hand position as shown.
WARNING: To reduce the risk of serious personal
injury, ALWAYS hold securely in anticipation of a
sudden reaction.
Proper hand position requires one hand on the
anti‑slip handle
4
.
Applying Torque (Fig. A, D—F)
WARNING : Familiarise yourself with operation and
feedback before use.
1. Ensure the socket is firmly and securely connected to the
fastener and wrench.
2. Hold the wrench handle
nOTE: Do not use accessories or an extension.
3. Using smooth effort, pull the wrench at 90° to the handle.
4. Ensure a smooth, gradual increase of force toward the
target value and status lights.
5. The wrench will produce an audible clicking when it
reaches 100% of the target value.
6. Stop tightening.
Maintenance
1. Clean your torque wrench with a dry cloth. Do not use
any solvent or detergent.
2. Never dismantle.
3-Point Calibration Certificate:
Torque testing and adjustment at 20%, 60% and 100% of
the torque wrench capacity, within the standard's tolerances.
Issuing of a numbered and dated declaration of conformance.
Checking Tool Accuracy and
Document Updates:
The Mac Tools® metrological laboratory will issue calibration
certificates upon request.
Calibration
An annual recalibration or after 5000 uses, is necessary to
maintain accuracy. Please contact your local dealer to schedule.
We advise you to have your torque wrench checked regularly
on a test rig or by the Mac Tools® metrological laboratory (about
once a year, or more often for intensive use or if dropped).
6
4
with one hand.
Repairs
The charger and batteries are not serviceable. There are no
serviceable parts inside the charger or battery pack.
WARNING: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (including brush
inspection and replacement, when applicable) should
be performed by a Mac Tools factory service center
or a Mac Tools‑authorized service center. Always use
identical replacement parts.
Register
Thank you for your purchase. Register your product now for:
• WARRAnTY sERViCE: Registering your product will
help you obtain more efficient warranty service in case
there is a problem with your product.
• COnFiRMATiOn OF OWnERshiP: In case of an
insurance loss, such as fire, flood or theft, your registration
of ownership will serve as your proof of purchase.
• FOR YOUR sAFETY: Registering your product will allow
us to contact you in the unlikely event a safety notification
is required under the Federal Consumer Safety Act..
One Year Limited Warranty
Mac Tools® torque wrenches are guaranteed for 1 year from
the date of purchase against any defect or manufacturing
fault, and 90 days for calibration accuracy. Mac Tools®
accessories and wear parts are covered by the legally
enforced guarantee. This guarantee does not cover the
following cases: normal wear, non compliance of instructions
of use and safety guidelines, nonconventional or abusive
use of the tool, tool overloading, lack of servicing or
maintenance, intrusion of foreign bodies, tools which have
been disassembled or modifed, or featuring traces of shock
(dents, cracks, broken covers, etc.), use with poor quality or
non‑compatible accessories.
To use the guarantee, provide: the tool with its serial
number as well as the legible and unmarked original
invoice designating the product and its date of purchase.
Detailed conditions of application of the guarantee: call
your distributor. This lifetime warranty is subject to the
disclaimers and limitations described below, and is in
lieu of all other warranties, express or implied, including
the implied warranty of merchantability or fitness for a
particular purpose.
This warranty gives you specific legal rights and you may
have other rights which vary in certain states or provinces.
FREE WARning lABEl REPlACEMEnT: If your warning
labels become illegible or are missing, call 1‑800‑662‑8665
for a free replacement.
Publicidad
