Publicidad
Idiomas disponibles
Idiomas disponibles
Recommended Installation Size:
A
100mm
B
100mm
103°
120mm
111.5°
140mm
118.5°
160mm
121°
180mm
106°
200mm
96.5°
Note: If the interval between the gate and the wall is too small or it has interference after the gate
completely open, please install a gate safety stopper (prepare by user) to prevent injury to person
or damage to property.
If there is enough space between the gate and the wall after the gate completely open, then safety
stopper is not a must option. (Motor will stop after it's blocked)
8. Installation Steps
8.1 Preparation before main machine installation
a) Before installing the gate opener, please confirm that the gates were installed correctly, ensure
that the gate can be manually operated smoothly, and the limit stopper can effectively prevent the
gate to continue moving.
b) Please keep a distance of 15-20mm between the two swings for installing the electric lock. If
electric lock is not required, then no need to consider the distance between the two swings;
c) The recommended mounting height of the 2 main machines is around 300 ~ 800mm above the
ground, and make sure there are reliable fixed points for mounting brackets.
Cable bury
In order to ensure the normal operation of the gate opener and protect the cable from damage,
please use two PVC pipes to bury the motor and power cables, and the control cables separately. One
PVC pipe for motor and power cables, the other one for control cables.
Mounting brackets fixing
EN
120 mm
140 mm
101°
99.5°
108.5°
106.5°
115°
112.5°
110°
101.5°
98.5°
92°
90.5°
160 mm
180 mm
98.5°
97.5°
105°
103°
106°
96.5°
93.5°
200 mm
97°
100.5°
Publicidad
