MSW Motor Technics MSW-GDOOR-005B Manual De Instrucciones página 50

closed limit position (as shown in figure 3). Similarly, when the gate opens inward, please install a
limit stopper at the closed limit position (as shown in figure 2).
Before installing the main machine, please make sure the main machine and components are in

good mechanical performance and the gate can be manually operated flexibly.
One control unit can optionally drive one main machine or two main machines.

Earth leakage circuit breaker must be installed on where the gate movement can be seen, and

the minimum mounting height for the control box should be over 1.5m to avoid being touched
by kids.
After installation, please check whether the mechanical property is good or not, whether gate

movement is flexible or not after unlocking, and whether the infrared sensor (optional) is
installed correctly and effectively.
EN