Descargar Imprimir esta página

Bosch GKE 35 BCE PROFESSIONAL Instrucciones De Servicio página 18

Ocultar thumbs Ver también para GKE 35 BCE PROFESSIONAL:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 42
1 609 929 J52.book Seite 1 Montag, 27. März 2006 10:51 10
Safety Notes
WARNING! Read all safety warnings and all in-
structions. Failure to follow the warnings and in-
structions may result in electric shock, fire and/or se-
rious injury.
Save all warnings and instructions for future ref-
erence.
The term "power tool" in the warnings refers to your
mains operated (corded) power tool.
It is recommended that the first time user should
have practical instruction in the use of the chainsaw
and the protective equipment from an experienced
operator and that the initial practice should be cut-
ting logs on a saw horse or cradle.
Explanation of symbols:
Read instruction manual.
Do not expose to rain.
Remove the plug from the socket or mains
immediately before carrying out any adjust-
ments, servicing or maintenance or if the ca-
ble is damaged or cut.
Obtain and wear eye and ear protection at
all times while operating the power tool.
The kick back brake and the run
down brake stop the chain saw
within short time.
Work area
Keep work area clean and well lit. Cluttered
and dark areas invite accidents.
Do not operate power tools in explosive at-
mospheres, such as in the presence of flam-
mable liquids, gases or dust. Power tools cre-
ate sparks which may ignite the dust or fumes.
Keep children and bystanders away while op-
erating a power tool. Distractions can cause you
to lose control.
Children and juveniles, except above age 16,
under supervision and for educational pur-
poses, must not operate the chain saw, nor
should persons unfamiliar with the saw or its
handling (when borrowing). Ensure operation
manual is with the saw. Persons unfit or tired
must not operate the chain saw.
18 • 1 609 929 J52 • TMS • 15.03.06
Electrical safety
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use
of a cord suitable for outdoor use reduces the risk
of electric shock.
Personal safety
Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or med-
ication. A moment of inattention while operating
power tools may result in serious personal injury.
Use safety equipment. Always wear eye pro-
tection. Safety equipment such as dust masks,
non-skid safety shoes, hard hat, or hearing pro-
tection used for appropriate conditions will reduce
personal injuries.
Avoid accidental starting. Ensure the switch
is in the off position before plugging in. Carry-
ing power tools with your finger on the switch or
plugging in power tools that have the switch on in-
vites accidents.
Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewel-
lery or long hair can be caught in moving parts.
If devices are provided for the connection of
dust extraction and collection facilities, en-
sure these are connected and properly used.
Use of these devices can reduce dust related
hazards.
English - 1

Publicidad

loading

Este manual también es adecuado para:

Gke 40 bce professional