HemoCue Hb 301 Manual De Operación página 33

equipment and IEC 60601-1 for medical equipment). Fur-
thermore all configurations must comply with the system
standard, IEC 60601-1-1. Connections of additional
equipment to the signal input or signal output connec-
tions is deemed to be "configuring a medical system",
and therefore assumes responsiblity for the systems
compliance within the requirements of IEC 60601-1-1.
For further information, please see the attachment
Technical Specifications (EMC-RF) or contact your local
HemoCue distributor.
Warranty
The analyzer carries a 24-month warranty from the day
of receipt. After the expiration date of the warranty,
maintenance and repairs are offered at a fixed price.
Service and disposal
The analyzer should be cleaned as recommended under
"Maintenance" prior to service or disposal. Consult local
environmental authorities for proper disposal.
Spare parts and accessories:
The following accessories and spare parts are available:
• Power adapter
• Battery lid
• Cuvette holder
• HemoCue Cleaners
• HemoCue Lancets
Patent
This product is covered by US patent no. 6 831 733
Symbols used
Attention, see instructions for use
!
CE mark
Class II equipment
Only valid within the European Community.
Indicates seperate collection for waste of
electrical and electronic equipment.
Serial port
90
Relative humidity, non-condensing
5
References
1. HemoCue Hb 301 Microcuvettes package insert
2. Dacie and Lewis, Practical Haematology Ninth
edition.
3. Reference and Selected Procedures for the
Quantitative Determination of Hemoglobin in
Blood; Approved Standard NCCLS Document H15-A
4. Evaluation of precision performance of clinical
chemistry devices; approved Guideline NCCLS Docu-
ment EP5-A
5. NCCLS Document EP6-A Evaluation of the Linearity
of Quantitative Measurement Procedures: A Statisti-
cal Approach; Approved Guideline
33
.
1