Publicidad
Idiomas disponibles
Idiomas disponibles
Honeywell
1.1 Intended use
CAUTION!
Responsibility for the use of the meter in terms of suitability,
intended use and the corrosion resistance of the materials to the
medium is solely in the hands of the operator.
INFORMATION!
The manufacturer shall not be liable for damage caused by
improper or inappropriate use.
1.2 Approvals and certifications
Marking / Declaration of conformity*
The manufacturer certifies conformity with the declaration
of conformity and by attaching the marking.
The
requirements of the relevant EU Directives.
Comprehensive information on the applicable Directives
and Standards, as well as recognized certifications, is
contained in the declaration of conformity.
The EU declaration of conformity is included in the delivery
and is also available to download at www.docuthek.com.
ATEX/UK-EX
DANGER!
The industrial diaphragm gas meter is suitable for use in
Zone 1 or Zone 2/0 hazardous areas and is approved with the
following certifications and manufacturer's declarations:
II 2G Ex h IIC T4 Gb
8000310656
II 3/1 G Ex h IIB T5
TÜV 13 ATEX 122235 X (ATEX-Zone 2/0) TÜV NORD CERT GmbH
EMA21UKEX0024
* The marking on the device shall be applicable.
10
measuring
See chapter 8. Approvals and Annex A – Standards
and Norms for details of other approvals and
Directives.
(ATEX-Zone 1)
(UK-EX)
73020212j
instrument
meets
TÜV NORD CERT GmbH
Element Materials Technology
© Elster GmbH | All rights reserved. Subject to modification
the
statutory
Publicidad
