Honeywell BK-G40 Manual De Instrucciones página 12

Honeywell
1.5 Product liability and guarantee
The responsibility as to whether the measuring instrument is suitable for the
intended use is that of the operator. The manufacturer cannot accept any
liability for the consequences of misuse by the operator. Improper
installation or operation of the measuring instruments (systems) will render
the warranty void. Furthermore, the relevant "General Terms and Conditions"
which form the basis of the purchase contract also apply.
1.6 Personnel
This manual is aimed at personnel who have adequate specialist and
technical knowledge (in Germany, for instance, in accordance with DVGW
Codes of Practice 492 and 495 or comparable technical regulations) on the
basis of their training and experience in the sector of energy and gas
distribution.
1.7 Legal declarations
 The metrological conformity assessment is based on the regulations of
the country concerned, in which the measuring instrument will be used.
 The period of validity of calibration is based on the regulations of the
country concerned, in which the measuring instrument will be used.
1.8 Recycling and environmental protection
Honeywell has designed the transport packaging of the measuring
instrument to be environmentally friendly. Packaging materials are always
selected consistently with a view to recycling. The cardboard items used
constitute secondary raw materials for the paperboard and paper industry.
The foam packaging is recyclable and can be reused.
Plastic sheeting and strips/bands are also made of recyclable plastic. At
Honeywell, subsequent recycling and disposal are already elements of the
product development process. When selecting the materials, we allow for
reusability of the materials, suitability of materials and subassemblies for
dismantling and separation, and the risks of environmental pollution and
health risks when recycling and dumping on landfill sites. The measuring
instruments mainly consist of metallic materials which can be melted down
again in steelworks and metallurgical plants and which can thus be reused a
virtually unlimited number of times. The plastics used are listed in Annex B
to ensure that the materials can be sorted and separated for the purposes of
subsequent recycling.
12 73020212j © Elster GmbH | All rights reserved. Subject to modification