Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
CHARGING:
1. Connect supplied charging cable's
USB-C port
2. Connect the charging cable's USB-A port to a charging source
(5V DC, Min 1.5A, not included).
3. The Battery Level Indicator
POWER ON UNIT AND LASER: Press the Laser / Power-ON Button
POWER OFF LASER: Press the Clear / Power-OFF Button
POWER OFF UNIT AND LASER: Press and hold the Clear / Power-OFF
Button
for 3 seconds.
5
AUTO-POWER OFF: The laser will automatically turn off after
30 seconds of inactivity. The unit will automatically power off after
3 minutes of inactivity.
TAKING MEASUREMENTS: Press the Laser / Power-ON Button
once to capture a measurement. The laser will turn off. Press the
Laser / Power-ON Button
SINGLE / CONTINUOUS MEASUREMENTS: To swap between Single
Measurement Mode and Continuous-Measurement Mode, press and
hold the Laser / Power-ON Button
Mode, the unit will display the minimum, maximum, and current
readings, and the laser will blink while on. Press the
Laser / Power-ON Button
screen. The laser will turn off. Press the Laser / Power-ON Button
again to take another measurement.
8
OPERATING INSTRUCTIONS
of the 93LDM200.
9
again to take another measurement.
1
to hold the current measurement on
1
USB-C connection to the
11
will indicate charging status.
L
. In Continuous-Measurement
1
.
1
.
5
1
1
Publicidad
