REPLACEMENT OF THE BATTERY
The state of charge of the battery is shown by
an indicator the selector is provided of.
Battery partially uncharged: when connected
to the battery or after introducing a valid access
code, the digital selector BEEPS for 2 seconds.
It is possible to enter and send access codes,
but not to program.
Battery uncharged: when connected to the
battery or after pressing one of the keys, the
digital selector sends out 3 SHORT BEEPS FOR
3 TIMES. No operation is possible; it is
necessary to replace the battery.
WARNING: Use only 9 Volts ALKALINE EF22
batteries
ENGLISH
INSTALLATION:
Before fixing the digital selector (RADIO
VERSION) check that the system work properly:
1. Program the keypad and store a channel on
the receiver (read carefully the handbook of
the receiver)
2. Place the keypad (without fixing it) and check
that sending the code previously stored the
receiver activates the correspondent output
3. If it works properly, fix the keypad, otherwise
shorten the distance from the receiver until
got a proper working.
WARNING
Do not install the radio digital selector on
metallic surfaces.
- 18 -