Publicidad
Idiomas disponibles
Idiomas disponibles
CUSTOMIZATION OF THE PROGRAMMING CODE
OPERATIONS TO BE MADE ON THE KEYPAD
Key in "ENTER" + PROGRAMMING CODE (factory code is
1
999999) + ENTER
2
Key in within a minute the KEY 1 + ENTER
3
Repeat the PROGRAMMING CODE + ENTER
4
Key in the NEW PROGRAMMING CODE + ENTER
5
Repeat the NEW PROGRAMMING CODE + ENTER
WARNING: if the operation has failed (e.g. for having entered chosen code and confirmation code
different one from the other or for having waited more then 1 minute) the digital selector goes back
to SLEEP mode keeping the original access code and it is necessary to start again
WARNING: in case of loss of the PROGRAMMING CODE, contact V2 technical service.
KEYPAD SIGNALLING
1 BEEP of 1,5 seconds + LED1
and LED2 on for 1,5 seconds
1 BEEP + LED1 on
1 BEEP of 1 second
1 BEEP of 1 second
• 1 BEEP of 3 seconds if the
• short flashes of the LED if
- 21 -
operation is correct;
incorrect
ENGLISH
Publicidad
