Publicidad
Idiomas disponibles
Idiomas disponibles
If the transmitter is four-channel, the dip-switch code to be set coincides with the position of the
micro switches from 1 to 10 plus 2 digits, which are:
00 if the key stored on the receiver is the key 1 (e.g. 1010101010 00)
10 if the key stored on the receiver is the key 2 (e.g. 1010101010 10)
01 if the key stored on the receiver is the key 3 (e.g. 1010101010 01)
11 if the key stored on the receiver is the key 4 (e.g. 1010101010 11)
If no transmitter has been stored on the receiver, the dip-switch code can be set entering a random
sequence of 12 digits 0 or 1.
OPERATIONS TO BE MADE ON THE KEYPAD
Key in "ENTER" + PROGRAMMING CODE (factory code is
1
999999) + ENTER
2
Key in within a minute the KEY 3 + ENTER
3
Key in the NUMBER OF THE CHOSEN CHANNEL + ENTER
Key in the CHOSEN DIP-SWITCH CODE + ENTER
4
Micro switch set to ON = 1
Micro switch set to OFF = 0
KEYPAD SIGNALLING
1 BEEP of 1,5 seconds + LED1
and LED2 on for 1,5 seconds
LED1 + LED2 on + 3 BEEP
1 BEEP of 1 second
• 1 BEEP of 3 seconds if the
• short flashes of the LED if
- 25 -
operation is correct;
incorrect
ENGLISH
Publicidad
