Publicidad
Idiomas disponibles
Idiomas disponibles
PROGRAMMING
The programming menu allows the modification
of the following parameters:
1. PROGRAMMING CODE
2. ACCESS CODE
3. DIP-SWITCH CODE (only version
Royal/53200)
4. WOKING MODE: ROYAL or 53200
Normally, the keypad in on SLEEP mode, i.e.
waiting for a control, and the backlight is off.
In programming mode, the keypad goes back to
SLEEP mode in the following cases:
• When pressing the key CLEAR in any
programming phase.
• When more than one minute pass between
the pressure of two consecutive keys.
• After the 3 second BEEP stating the correct
execution of an operation.
ENGLISH
• In case of mistake (e.g. pressure of a key
different from 1/2/3/4 while choosing the
menu).
In any case, if you want to go on with
programming it is necessary to start again from
the entering of the programming code.
In the working mode the digital selector goes
back to SLEEP mode after 5 seconds of
inactivity.
1. PROGRAMMING CODE
The programming code is the combination to be
entered in order to modify the settings of the
keypad. The factory code is 999999.
To guarantee more safety, we suggest
customizing the programming code and keeping
the new one in a safe place.
- 20 -
Publicidad
