CEMO DT-Mobil Easy 440l Manual página 22

GB
5.2 DT-Mobil PRO PE
5.2.1 Storage
During transport and storage, do not expose the
DT-Mobil PRO PE to direct sunlight for an exten-
ded period of time. Excessive heating can lead to a
reduction in the quality of the fuel.
If overpressure occurs in the closed container as a
result of heating, it is released via vent valve C.
Suitable storage conditions:
• Ambient temperatures from -10 °C to +40 °C.
• Level surface.
• Hood for outdoor storage.
5.2.2 Loading the filling station
Risk of injury!
The cover must be closed.
5.2.2.1 Moving with pallet truck
The DT-Mobil can be moved with the pallet truck
on a paved flat floor. It is picked up between the
fork pockets on the underside.
5.2.2.2 Loading with forklift
i
Important!
For safe lifting with a forklift, use the fork
pockets provided as receptacles on the
underside.
22
5.2.2.3 Loading with crane
Danger!
Serious personal injury possible if a DT-
Mobil crashes.
Standing underneath the suspended
load while the crane is being operated is
prohibited.
i
Important!
Do not damage the cover with the crane
slings!
• For crane operation, the crane hangers atta-
ched to the top of the tank must be used.
• Attach 4 suitable
load-handling
attachments of equal
length to crane hangers
(minimum length 2 m).
• DT-Mobil can be
loaded or
unloaded from
or onto the
transport
vehicle.
5.2.3 Transporting
During transport, observe the pertinent regulations
for transport and securing loads, in particular:
• Road traffic (licensing) regulations of the coun-
try concerned
• CEN 12195 Parts 1 to 4 for calculation and
lashing.
Use the crane hangers to attach the tension straps
when fastening them to the transport vehicle.
i
Important!
Form before force!
First, try to load the filling station using
a positive connection (e.g. by slinging to
the sides).
Recommendation:
Use a non-slip mat.