Publicidad
Idiomas disponibles
Idiomas disponibles
58
TROUBLESHOOTING
(see Table)
In case of any malfunction, defect of the appliance or if you suspect any breakage after a fall, unplug
the appliance immediately.
If you are unable to solve the problem referring to the table below, contact an Authorized Service
Centre.
Only qualified experts should repair the appliance.
We are not liable for any damage caused by repairs not made correctly and/or by unauthorized
personnel. In these cases the warranty does not apply.
Problem
The appliance does not turn
on.
The coarseness of the grind
is not uniform.
The coffee is not coming out
of the discharge opening
correctly.
The motor gets blocked.
(Only in models with the
start button 13 Fig. 1)
The appliance starts
dispensing as soon as one
of the shots is selected.
•
Make sure it is plugged in.
•
Make sure the safety circuit breaker is closed.
•
Check that the main switch of the appliance is ON.
•
If the problem occurs itself after a long period of intensive
use or overfilling, the motor could be in thermal protection
lock! Wait at least 20 minutes and try again. The waiting
time can be reduced by putting the appliance in a cool
place.
•
Try grinding very coarsely for a few seconds, then return to
the correct setting.
•
Call the Technical Assistance Service to check and change
the burrs.
•
Check that the coffee discharge opening is free.
•
If the motor gets blocked due to incorrect regulation of
grinding or to the presence of a foreign body in the burrs,
try increasing to the coarsest grain size by turning the
grinding adjustment disc clockwise (6 Fig. 1).
If this is not enough, switch off the appliance, disconnect
the plug from the socket and consult technically qualified
personnel.
•
Make sure that when you turn on the appliance the filter-
holder is not positioned and that the start button is not
pressed in any way.
Solution
GB
Publicidad
