Descargar Imprimir esta página

Franke FMY 8391R HI Manual De Uso página 24

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 74
• Press the last keyboard on the left to
select the correct setting.
See the following table for the specifica-
tions:
Value on
KW Notes
swipe key-
board
10. HOB FUNCTIONS
Lock
Child lock
Boost function
Cooking area timer
Timer (generic)
24
It is possible to lock the hob functions during use, e.g. to clean the hob.
To enable/disable: press
This function prevents accidental use of the appliance. This cannot be used during a cooking oper-
ation
To enable: press
, simultaneously press and release
All the digits that indicate
The operations described must be completed within 10 seconds.
To disable: press
, simultaneously press and release
All the digits that indicate
The operations described must be completed within 10 seconds.
Every cooking area can be set to an additional power level for a maximum of 10 minutes.
To enable: select one of the 4 cooking areas and select "Boost" on the swipe keyboard. The corres-
ponding digit indicates
To disable: select one of the other possible values on the swipe keyboard.
The timer allows a specific cooking area to be switched off when the set time expires.
The cooking areas can be programmed individually because each one has its own timer.
To enable: turn on the hob and select one of the 4 cooking areas, then press "+" and "-" to set the
timer. The symbol
down. The increase and decrease of the value during the setting varies according to the time to be
set. The display in the time management controls area shows the countdown.
To confirm the set time, do not touch anything for 5 seconds.
To disable: wait until the end of the countdown or reset the time values (press "+" and "-" and reset
with "-").
Timer with alarm for generic use.
To enable: turn on the hob, then press "+" and "-" to set the timer. Press "+" and "-" separately to
set the countdown. The increase and decrease of the value during the setting varies according to
the time to be set. The display in the time management controls area shows the countdown.
To confirm the set time, do not touch anything for 5 seconds.
To disable: wait until the end of the countdown or reset the time values (press "+" and "-" and reset
with "-").
0
1
2
3
Once the correct value has been
entered, confirm by pressing and hold-
ing
and .
+
.
.
disappear.
.
of the cooking area lights up. Press "+" and "-" separately to set the count-
7.4 Standard initial setting
4.5
3.5
2.8
+
and then again
+
and then again .
.

Publicidad

loading

Este manual también es adecuado para:

4300