Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Once you have finished the installation
make sure the product works correctly. Pay
special attention to any strange oscillation
or malfunction in any of the fan parts.
Remote control connection:
See picture 06 on page 8.
L : AC IN 220-240V
N : AC IN 220-240V
USING THE APPLIANCE
This device is very easy to use and does
not require much knowledge. However, we
advise you to familiarize yourself with the
instructions below.
The fan has 6 power levels that can be
selected through the remote control. It also
has a timer of up to 2 hours.
Remote control:
See picture 07 on page 9.
The device incorporates a remote control,
for a more comfortable and efficient use.
In order for the remote control to work, it
must always be aimed at the fan.
Before you start using it, please take a few
minutes to familiarize yourself with the
functions:
10. Buttons 1 to 6: Press these buttons to
set the fan speed, with 1 being the
lowest and 6 the highest.
11. Fan ON/OFF button: Press it to turn
the device on or off.
12. Winter/summer
Press the button to activate the
winter function or to return to the fan
function (summer mode).
13. Warm light button
14. White light button
15. Cold light button
16. Light ON/OFF button: Press it to turn
on the lights of the device.
17. Down button: Press this button to
decrease the light brightness.
18. Up button: Press this button to
increase the light brightness.
19. 30": Setting for the fan to turn off
32
function
button:
automatically after half an hour of
operation.
20. 2H: Setting for the fan to turn off
automatically after two hours of
operation.
21. Natural wind mode button: press it to
activate the natural wind mode
In order to be able to use the ceiling fan
through the remote control, the receptor
included with this device must be installed
before, as explained in the installation
section of this manual.
To use the remote control, you must add 2
batteries to the bottom of the remote.
If your model has LED light with different
colour tones, you can change the colour
temperature of the light by switching it on
and off with the wall switch, the remote
control or, in case of a smart fan, from your
terminal. See picture 08 on page 9.
Each
associated with the receiver
included with the fan.
When you turn off the fan with
the remote controller, the light
settings will be saved according
to the last option you selected.
For example, if the light is set to
the "warm" position when you turn off the
fan, when you turn on the fan again with
the remote controller the light will be set to
"warm" again. However if you turn on/off
the fan with the wall switch the settings
will not be saved and the light will turn on
according to the default settings (some
models do save the settings when using
the wall switch)
First use:
• Switch it on.
• Check the speed and light (if your
model has it)
Using the product with the switch and
the remote controller:
• You cannot control speed with the wall
remote
control
is
Publicidad
