Publicidad
Idiomas disponibles
Idiomas disponibles
switch. The wall switch only allows
you to turn it on. Speed can only be
selected with the remote controller.
• You can use the switch to turn on/off
the light. Depending on your model,
light:
• Will automatically turn on when
you press the switch.
• Turn the light on with the remote
controller and then press the switch.
The light will turn off and the settings
will be saved for the next time you
use it. You can check these settings
by pressing the switch again.
Winter function:
This option involves reversing the blades
to distribute the hot air that accumulates
against the ceiling, allowing continued use
of your fan throughout the year.
To use this function simply press the
remote control button. The fan must be
in operation to be able to activate this
function, once you have activated it, the
fan will stop completely and it will reverse
the rotation of the blades
WiFi. Smartphone:
This model has WiFi function, so you
can control it using your mobile phone
(smartphone)
Follow the instructions included in the
user manual "APP connect manual" to
install the app and control the device.
Remember your mobile device must be
connected to the local WiFi network to be
able to connect with your new ceiling fan.
CLEANING AND MAINTENANCE
This product does not require a great deal
of maintenance. To clean, please follow the
instructions below:
• Unplug the fan first and wait until it
comes to a complete stop.
• Use only a soft damp cloth.
• Do not use abrasive cleaners.
• If you are not going to use the fan
for some time, it is recommended to
remove the batteries from the remote
control and store it in a clean and dry
place.
TROUBLE SHOOTING
Occasionally you can solve yourself some
failures in your appliance. Check the
Problem-Solution chart included in this
manual. See table 02 on page 11.
Otherwise, please contact our Customer
service.
If you notice any failure you cannot fix
yourself and it´s preventing you from using
the appliance, disconnect it from the power
supply.
Any repairing intervention or
replacement of electrical cables
must be carried out by a skilled
and
Otherwise it could be very
dangerous.
Reprogramming the remote controller:
Once you have finished the installation,
assembly and electric connection of your
fan, check that the remote control interacts
correctly with the fan, if it does not it is
possible that the remote controller needs
to be reset.
To reset your remote controller, please
follow these steps (See picture 09 on page
10):
• Step 01-A: Press the wall switch so that
the lighr fan is on and there is power
getting to the product.
• Step 02-B: Within 5 seconds, press and
hold the "White light" button until the
light flashes 3 times.
REPAIR AND SPARE PARTS SERVICE
All original spare parts relevant for
the correct operation of the appliance
according to the regulation concerning
sustainable
design
competent technician.
will
be
available
EN
33
Publicidad
