Publicidad
Idiomas disponibles
Idiomas disponibles
The command must:
1) be positioned at a minimum height of 1500 mm from the floor
2) be positioned in such a way that upon activation, the person in charge of opening/closing has all the moving parts within
his field of vision.
Do not wash the appliance with solvents or water jets. Do not immerse the appliance in water. All repairs must be carried out by
qualified personnel (manufacturer or authorised service centre). Always and exclusively request the use of original spare parts.
Failure to use original spare parts could compromise correct operation of the product and the safety of persons and property,
also invalidating the benefits of the warranty that covers the appliance. In case of problems or uncertainties, contact the point
of sale where the product was purchased or the manufacturer directly.
The system must be frequently checked, in particular check the cables, hinges, safety arms and supports in general for any
imbalances and signs of wear or damage. Do not use if repair or adjustment is necessary, as installation failure or incorrect
automation balancing may lead to injury.
3. TECHNICAL DATA
3.1
TECHNICAL DATA TABLE AND CE MARKING
The CE marking certifies that the actuator complies with the essential health and safety requirements of the European product
directives. The CE marking can be identified by means of a dedicated adhesive plate applied externally to the product which
indicates some of the data in the table below:
TECHNICAL DATA
LIWIN L35 Slim - 230V
MAX TRACTION FORCE
PUSHED FORCE MAX
POWER SUPPLY
FREQUENCY
TYPE OF SERVICE
NO LOAD SPEED
LOADED SPEED
AVAILABLE STROKES
TOP HUNG OUTWARD, BOTTOM HUNG
TYPES OF OPENINGS
INWARD, HINGED, SKYLIGHT DOMES,
OPERATING TEMPERATURE
DEGREE OF IP PROTECTION
SOFT START/SOFT STOP
MAX LOAD CURRENT
ABSORPTION
MAX ABSORBED POWER
LOAD
CURRENT CONSUMPTION (IN
STAND-BY)*
ABSORBED POWER (IN
STAND-BY)*
OBSTACLE DETECTION
PARALLEL CONNECTION
YES (MAX 30 ACTUATORS)
SYNCHRONISATION
DIMENSIONS
CABLE
LIMIT SWITCH IN OPENING
LIMIT SWITCH IN CLOSING
STATIC RETENTION FORCE
ACTUATOR WEIGHT
COLORS
GREY/WHITE/BLACK/IVORY
CODE
ML35SVNNW40H0W00Z
ML35SVNNW40H1W00Z
*Only in case of always powered.
28
350 N
350 N
110/230 VAC
50/60 HZ
3 min ON
7 min off
11mm/s
6mm/s
120-300-350-400 mm
TOP HUNG OUTWARD, BOTTOM HUNG
INWARD, HINGED, SKYLIGHT DOMES,
PANTOGRAPH
-5°C + 50°C
30
YES
0,25 A
31 W
-
-
CURRENT ABSORPTION
YES (MAX 30 ACTUATORS)
NO
27 X 54 X 440 mm
PVC 3x0.75 L2.5m
ENCODER
AMPEROMETRIC
1500 N
1.110 Kg
GREY/WHITE/BLACK/IVORY
ML35SVNNW40H0B00Z
ML35SVNNW40H0G00Z
LIWIN L35 Slim - 24V
LIWIN L35 Slim WIFI - 230V
350 N
350 N
24 VDC
n/a
3 min ON
7 min off
11mm/s
6mm/s
120-300-350-400 mm MILLIMETRIC
120-300-350-400 mm
ADJUSTMENT WITH MOWIN' APP
TOP HUNG OUTWARD, BOTTOM HUNG
INWARD, HINGED, SKYLIGHT DOMES,
PANTOGRAPH
-5°C + 50°C
30
YES
0,95 A
23 W
-
-
CURRENT ABSORPTION
YES (MAX 30 ACTUATORS)
NO
27 X 54 X 440 mm
PVC 2x0.75 L2.5m
ENCODER
AMPEROMETRIC
1500 N
1.110 Kg
GREY/WHITE/BLACK/IVORY
ML35SVNNW40L0B00Z
ML35SVNNW40L0G00Z
ML35SVNNW40L0W00Z
ML35SVNNW40L1W00Z
LIWIN L35 Slim WIFI - 24V
350 N
350 N
110/230 VAC
50/60 HZ
3 min ON
7 min off
11mm/s
6mm/s
120-300-350-400 mm MILLIMETRIC
ADJUSTMENT WITH MOWIN' APP
TOP HUNG OUTWARD, BOTTOM HUNG
INWARD, HINGED, SKYLIGHT DOMES,
PANTOGRAPH
-5°C + 50°C
30
YES
0,25 A
31 W
0,010 A
0,8 W
CURRENT ABSORPTION
YES (MAX 30 ACTUATORS)
YES UP TO 8 ACTUATORS
27 X 54 X 440 mm
PVC 4x0.75 L2.5m
ENCODER
AMPEROMETRIC
1500 N
1.110 Kg
GREY/WHITE/BLACK/IVORY
ML35SVNWF40H0B00Z
ML35SVNWF40H0G00Z
ML35SVNWF40H0W00Z
ML35SVNWF40H1W00Z
350 N
350 N
24 VDC
n/a
3 min ON
7 min off
11mm/s
6mm/s
PANTOGRAPH
-5°C + 50°C
30
YES
0,99 A
24 W
0,025 A
0,6 W
CURRENT ABSORPTION
YES UP TO 8 ACTUATORS
27 X 54 X 440 mm
PVC 4x0.75 L2.5m
ENCODER
AMPEROMETRIC
1500 N
1.110 Kg
ML35SVNWF40L0B00Z
ML35SVNWF40L0G00Z
ML35SVNWF40L0W00Z
ML35SVNWF40L1W00Z
Publicidad
