cecotec TOUCH&TOAST EXTRA Manual De Instrucciones página 8

- Check the power cable regularly for visible damage. If the
cable is damaged, it must be replaced by the official Cecotec
Technical Support Service to avoid any danger.
- Place the appliance on an even, heat-resistant surface. Do
not place the appliance near heat sources, places with high
humidity levels, or combustible materials.
- Do not immerse the cable, plug, or any part of the appliance
in water or any other liquid. Do not expose the electrical
connections to water. Make sure your hands are dry before
handling the plug or switching on the device.
- Ensure that the mains voltage matches the voltage specified
on the appliance marking and that the mains plug is earthed.
- Do not use the appliance if the cable, plug, or frame is
damaged or if it is malfunctioning, has been dropped, or
damaged.
- Do not twist, bend, pull, or damage the power cable. Protect
it from sharp edges and heat sources. Do not allow the cable
to touch hot surfaces. Do not let the cable hang over the
edge of the working surface or worktop.
- Do not leave the appliance unattended during operation.
Unplug the appliance from the wall socket when you have
finished using it, when you leave the room where it is located,
when it is not being used, and before cleaning it. Pull from
the plug, not the cable, to disconnect it from the outlet.
- This appliance is designed for toasting unseasoned bread
only. Do not use it for any other purpose, and follow the
instructions described in this manual. Do not toast moist
foods or bread spread with butter, jam, glaze, or any other
condiments in the toaster, as this may cause fire or smoke.
- Ensure there is enough space above the appliance and on
both sides to provide proper air circulation.
- Do not cover the toaster with aluminium foil or similar
materials.
8
TOUCH&TOAST EXTRA