Publicidad
Idiomas disponibles
Idiomas disponibles
&
WARNING:
TO AVOID
SERIOUS
INJURY,
BEFORE
PERFORMING
ANY
SERVICE
OR ADJUSTMENTS:
1. Depress clutch/brake
pedal fully and set parking brake.
2.
Place gearshift
lever in neutral
(N) position.
3.
Place attachment
clutch
in "DISENGAGED"
position.
4. Turn ignition
key to "STOP" and remove
key.
5.
Make sure the blades and all moving
parts have completely
stopped.
6.
Disconnect
spark plug wire from spark plug and place wire where
it cannot
come in contact
with plug.
TRACTOR
TO REMOVE
MOWER
Mower will be easier to remove from the
right side of tractor.
1. Place attachment
clutch in "DISEN-
GAGED"
position.
2.
Move attachment
lift lever forward to
lower mower to its lowest position.
3.
Roll belt off engine
pulley.
4.
Remove small retainer
spring, and
remove clutch spring off pulley bolt.
5.
Remove large retainer spring, slide
collar off and push housing guide out
of bracket.
6.
Disconnect
anti-sway bar from chassis
bracket
by removing retainer spring.
7.
Disconnect
suspension
arms from rear
deck brackets by removing retainer
springs.
8.
Disconnect front links from deck by
removing
retainer springs.
9. Raise lift lever to raise suspension
arms. Slide mower out from under trac-
tot.
IMPORTANT:
If an attachment
other than
the mower
deck is to be mounted
on the
tractor,
remove the front links and hook
the clutch spring
Into square
hole in frame.
TO INSTALL
MOWER
1. Raise attachment
lift lever to its highest
position.
2. Slide mower
under tractor
with deflec-
tor shield to right side of tractor.
3.
Lower
lift lever to its lowest position.
4.
Connect
front links to mower deck and
secure with retainer
springs.
5.
Connect
suspension
arms to rear
deck brackets
and secure with retainer
springs.
6.
Connect
anti-sway
bar to chassis
bracket
and secure with retainer
spring.
7.
Push clutch cable housing
guide into
bracket,
slide collar onto guide and
secure
with large retainer
spring.
8.
Place flat washer
and clutch spring
on
idler pulley bolt and secure with small
retainer
spring.
9.
Install belt onto engine
pulley.
Small Retainer Sprin!
Clutch Sprin!
Small Retainer S
Clutch
Front Link
Retainer Sprin!
Anti-Sway
Housing
Retainer Springs
Deflector Shield
Bracket
Large Retainer Spring
2O
Publicidad
