Publicidad
Idiomas disponibles
Idiomas disponibles
4.
Remove the front cover of Dazebox Home using a guitar pick, being careful not to break the snap-in connectors. Insert the
pick into the hole beneath the cover, lift it carefully, and run it along the profile of Dazebox
other tools to apply force!
5
5.
Open Dazebox Home by unscrewing the screws on the access panel as indicated in the figure using a Torx TX10 screwdriver.
6a
6a.
For installations with cable routing, insert the power cable through the cable gland (P) located at the bottom of Dazebox
Home. The cable gland membrane (T, image 6a) on the underside of Dazebox Home has three blind holes Ø6 mm for con-
necting accessories (Power Management or Modbus, Ethernet). To insert the cable, break the blind bottom of the hole using
a screwdriver.
Home T
Home T
Home. Do not use a screwdriver or
Home S
Home S
EN
11.
Publicidad
