DAZE Dazebox Home Manual De Instalación página 7

03.2 - Light icons
Icons
1
2
3
4
5
6
04 - Safety information
Deactivate the power supply by acting on the upstream switch before intervening on Dazebox for cleaning
operations.
Read these instructions carefully before using Dazebox.
Installation, maintenance and decommissioning must be carried out only by qualified personnel.
Do not attempt to touch the contacts of the charging connector, do not insert any object into it.
Dazebox components must not be modified. Do not remove any labels, codes or nameplates.
Children, or people who may not be able to assess the risks related to the use of Dazebox, should not use the
device as they may incur serious injuries.
During operation, the Dazebox should not be exposed to direct radiation such as sunlight, as overheating can
damage internal components.
Incorrect installation or repair may cause hazards for the user. If the Dazebox bears mechanical damage, it must
be replaced immediately by qualified personnel
When the Dxazebox Home T version is not in use, ensure that the cable is not left on the ground or in a position
that may obstruct people.
Status
Connectivity
Vehicle
Energy
Management
Charger Lock
Programming
Self-consumption
Description
Blinking: Internet/4G enabled but not connected
On: Internet/4G enabled and connected
Connected: cable connected to the car
Disconnected: cable disconnected from the car
On: Power Management is turned on
Off: Power Management is turned of
Blinking: insufficient power from the grid
On: charger is locked (including time restrictions)
Off: if charger is unlocked
On: timing schedule is set
Off: timing schedule is disable
On: steady if self-consumption is enabled
Off: self-consumption disabled
EN
7.