DAZE Dazebox Home Manual De Instalación página 17

B
The Power Sharing feature is compatible with both single-phase systems (where single-phase chargers must be installed) and
three-phase systems (where three-phase chargers must be installed). In the case of a three-phase system with three-phase
chargers, it is important to evenly distribute the phases in the wiring of the various Dazebox Home units to avoid overloading
a single phase (see fig. B). During the configuration via the App of the Power Sharing feature, you will berequired to specify the
phase order on each individual charger.
11 - Configuration
The initial configuration of Dazebox Home must be done through the app. The Daze app will guide the user through the
charger and energy management system setup phase. The configuration can also be performed in environments where the
smartphone lacks an internet connection, provided that, at certain stages of the setup, the phone's connection is restored,
even if temporarily moving away from the charger.
1. Download App
Download the App from the Google Play or App Store stores.
2. Associate Dazebox Home with the App
After successfully completing the steps in the previous chapters of this guide, power up the charger and verify the startup of
the LEDs on the display. Launch the app downloaded on your smartphone and create an account. Once logged in, you will be
able to initiate the setup procedure for Dazebox Home. During the association phase, the Serial Number and PUK will be requi-
red. You can find these details on the card provided inside the packaging. Please store this card carefully.
EN
17.