8.2
"Open" operation
Prerequisites:
1 s
1. Press the push-button with the user key.
► Acoustic signal is heard.
9. Troubleshooting
Fault when locking
Acoustic signal is heard
twice
Acoustic signal is heard
three times.
Red and green LEDs on
the inside flash alternate-
ly three times.
If the faults cannot be rectified, contact our Dialock service at www.hafele.com.
10. Reset
A reset is required for maintenance purposes or for rectifying faults.
There are two reset options:
•
Simple reset,
•
complete reset.
The reset process described here can only be carried out in the dismantled state
LL 300 "Disassembly"
To perform a reset with the My Dialock Manager app or the MDU 110 mobile data transfer unit,
contact our Dialock service at www.hafele.com.
User key with locking authorisation
Possible cause
•
User key is not authorised
for locking
•
low batteries
.
2. Remove user key.
► Door is unlocked.
Remedy
•
Program the user key.
7. Programming the user key, page 32
•
Replace batteries immediately.
11.3 Changing the batteries, page 38
en
35