Unit Installation; General Duct Work Installation; Regeneration Air Inlet; Humidistat/Electronic Controller Installation - DST DC-31 Serie Manual Del Usuario

4 INSTALLATION

4.1 UNIT INSTALLATION

Use the installation guidelines as a reference only.

4.2 GENERAL DUCT WORK INSTALLATION

for more information.
•
•
•
•
• Install dry air out duct/channel at a high level.
•
• Allow wet air to disperse freely when exiting the duct.
• It is recommended to insulate the wet air duct.
•
•
•

4.3 REGENERATION AIR INLET

Free blowing operation require a damper installed to avoid overload. Remove damper when connecting to an air duct.
It is recommended to adjust the damper so that the electric consumption on the ammeter displays the nominal current stated in the technical data.
See heater current in
At delivery, a throttle is installed on regeneration air inlet.

4.4 HUMIDISTAT/ELECTRONIC CONTROLLER INSTALLATION

Install the humidistat/electronic controller away from the dry air out path to avoid false readings.
DC-31 T10, T16 EN.05
.
11
EN
Seibu Giken DST