Geemarc CL7160 Loop Manual De Uso página 6

PRODUCT CONTENTS
NOTE:
1. This type of battery should last for many years and normally
should not need replacing.
2. We recommend that the battery be charged for about 2 hours
before the system is used for the first time.
3. Place the headset in a charging cradle in the Transmitter /
Charger base. Verify that the red LED charging indicator is ON.
When the battery is fully charged a green LED turns on.
4. If the headset is placed in the charging cradle a green LED
turns on it means that the headset still has ample charge to
operate normally and there is no need to charge it.
Left cradle
charging Indicator
(Red/Green)
5. It is not possible to overcharge the battery. We recommend that
the headset be placed in the charging cradle when not in use.
BATTERY WARNINGS
Do not attempt to change or remove the battery
Do not dispose in fire
Keep away from children
Do not short circuit the charging terminals in the
bottom of the headset.
Note: This series of CL7160 products comes in 2 model variations
and spare headsets as below. This Instruction Manual covers all
of them.
1) CL7160 Wireless Single Headset System
2) Extra Wireless Headset
5
Right cradle
charging Indicator
(Red/Green)