Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION AND OPERATION
Installation
Take out the fan, and unscrew the wing nuts locked in the rear part of the tower and
assemble the base together.
Operation of Buttons
1. When plugging in the first time, you will hear 2 beeping sounds. This means the
fan is correctly connected. When the unit is on standby status, all the indicators are off.
2. On/Off button
1) After plugging in the power and all indicators lighting up for 1 second, the device
enters the standby state, with all functions turned off.
2) Under the standby status, press the On/Off button
default setting:
Fan: Working with the 4th speed, the indicator "
shows "4".
3) Under the working status, press the On/Off button
functions, and the device will return to standby mode.
3. Speeds
U n d e r t h e wo r k i n g st at u s , p re ss t h i s b u t to n to a d j u st t h e s p e e d f ro m
0 → 1 → 2... → 11 → 12 → 0..., and the LED lights shows the wind speed level
accordingly.
4. Timer
a. Under the working status, press Timer button to enter the timing mode and then
press the" ＋ "" － " buttons to set the timing: 0H → 1H → 2H... → 11H → 12H → 0H...
The timer indicator "
b. After the timing is set, the digital tube alternately displays the timing and the
current wind speed at 10-second intervals.
c. Under the standby status, press Timer button to to enter the timing mode and then
press the" ＋ "" － " buttons to set the timing: 0H → 1H → 2H... → 11H → 12H → 0H...
The timer indicator "
5. Swing
1 ） Under the working status, press this button to turn on or turn off the swing
function.
2 ） When the device swings, the indicator light will be on.
3 ） When the device stop swinging, the indicator light will be off.
6. Modes
When turn on the first time and working with the normal wind, press this button to
change the mode with this switch order: Normal Mode → Natural Mode → Sleeping
Mode → Normal Mode...
"will light up and the LED lights will switch on accordingly.
"will light up and the LED lights will flash.
to turn on the device, with
" is on and the LED lights
to turn off all the
35
Publicidad
