Publicidad
Idiomas disponibles
Idiomas disponibles
7. Sterilization
1) Under the working status, press this button to turn on or turn off the sterilization
function.
2) Function on: the device releases plasma, and the indicator light is on.
3) Function off: the device stops releasing plasma, and the indicator light is off.
8. Light-Off Button on the Remote Control
When the device is on, press this button, then it will enter into light-off status, all
the indicators will be off. Under this status, when the first time you press this button
or any other button, the indicators will return to on, without any change of the
function, then press other button to operate the device.
9. The timing tolerance of this device is ±3%.
10. Other Function
1) Auto Dim Function
All the lights will automatically dim without operation in 1 minutes, and if you press
the button again, the indicator lights will be on.
2) Smart Memory
Except the first time to turn on, when press the On/Off button under standby mode,
the device will run as before it turns off, except for timing and sleep mode.
USE OF REMOTE CONTROL
1. First open the battery cover at the back of the remote control, and install a (CR2032
3V) battery.
How to open the battery cover: first press and hold in the direction of arrow 1 in
the figure to release the upper snap of the battery cover, and then pull it out in the
direction of arrow 2.
2. When using, please align the position of the receiver.
3. When the power of the battery is exhausted, pull out the battery cover according
to the direction shown in the figure, and replace with a new battery (CR2032 3V).
When replacing the battery, please pay attention to the polarity, and then reset the
battery cover.
CLEANING AND MAINTENANCE
Cleaning of body surface
1 .
When cleaning the body, please be sure to turn off the power switch and
37
Publicidad
