Publicidad
Idiomas disponibles
Idiomas disponibles
6. User Code (UC)
6-1 The default user code is "1234". During initial installation, delete the default user
code, and then set the new user code.
6-2 A total of 6 user codes can be saved.
6-3 The user code can only be used to unlock the door and to set other functions.
6-4 The user code must be 4-10 digits in length.
6-5 The user code can be deleted or added at anytime as needed.
7. Delete individual user code
7-1 User codes can be deleted individually. The same user code can be reset after being
deleted.
7-2 The programming code is needed to delete individual codes.
8. Delete all user codes
8-1 All user codes can be deleted at once. The original user codes can be reset again.
8-2 After deleting all user codes, the automatic lock and the
set previously will automatically be disabled. The door can only be locked or
unlocked with a key. The original functions will be restored once the user code is set.
8-3 The programming code is required to delete all user codes.
9. Temporarily disable user code
9-1 This will temporarily disable all user codes. The automatic lockup and keypad lockup
functions that were set previously will automatically be disabled. A key must be used
to lock and unlock the door.
9-2 To restore the code function and other electronic functions, repeat the steps for
"Temporarily disable user code".
10. Create one-time user code
10-1 After the one-time user code is entered and used, it is disabled and won't be able to
open the door again.
10-2 The same one-time user code can be set repeatedly.
10-3 The programming code is needed for setup.
button lockup functions
9
Publicidad
