Publicidad
Idiomas disponibles
Idiomas disponibles
11. Restore the default PC & UC
Use this function when forgetting the programming code or to delete all settings.
12. Unlock
12-1 The door can be unlocked by entering a registered user code or the key from outside,
or pressing the lever down / turning the knob from inside.
12-2 To unlock with the keypad
1. Place the hand within 2 cm of the keypad or press any key once to light up the
keypad.
2. 2 to 4 numbers will appear on the keypad.
3. Enter the user code digits in order until the numbers disappear.
4. Press the
When the light for the key goes out, the system is unlocked.
13. Lock
When the keypad lights up, the user may press the keypad, press
and automatic lockup function to lock the door. The door can be locked from the inside by
turning the interior turn-piece.
14. Automatic lockup
14-1 The timer (10-99 seconds) of automatic lockup can be set up by the user as needed.
(The default timer is 30 seconds after the system is unlocked.)
14-2 To disable the automatic lockup, please repeat the steps for "Automatic lockup".
15. Code protection
If the user code is entered incorrectly over 5 times, the system will initiate the protective
function and disable the keypad for 45 seconds.
16. Backlight
When the hand is within 2 cm of the keypad, the backlight will light up for about 5
seconds, making it easy to operate lockset in the dark.
button.
button or use the key
10
Publicidad
