Publicidad
Idiomas disponibles
Idiomas disponibles
Function setup
All setup should be done when the system is unlocked. Turn
keypack backlight on by approaching your hand or pressing a
button, then proceed with setup.
Add new user code
Enter PC
Instruction: A total of 6 user codes with a combination of 4 to 10 digits can be set up.
Delete individual user code
Enter PC
Delete all user codes
Enter PC
Instruction: When all user codes are deleted and no new user code is set up, all electronic lockup
functions will be disabled. (The electronic functions will be restored when a new user code is
set.) During this time, the door must be locked or unlocked manually with a key.
Change programming code
Enter PC
Automatic lockup
Enter PC
Instruction: The default setup for the automatic lockup timer is 30 seconds. To modify the timer
for the automatic lockup, please refer to the instructions for "Automatic lockup timer". To cancel
the automatic lockup, please repeat the setup procedure for "Automatic lockup".
1
2
3
4
5
PC
Programming code
UC
User code
Confirm button
New UC
The UC to
be deleted
New PC
12
Publicidad
