6
Prolonged cooking, braising
7
Light frying
8
Frying, deep fat frying
9
Quick frying at high temperature
P
Quick heating
12. SUCTION HOOD
FUNCTIONS
The controls for the cooking areas, suction hood and timer
can be activated by pressing on the reference Digit.
Press "9" on the power bar twice to set INTENS-
" P "
IVE speed. This setting is timed to operate for 5
minutes. Once this time has passed, the system
will automatically return to the speed set previ-
ously. It is deactivated by selecting a different
speed.
This function is only available if Automatic mode
Function
is deactivated. Automatic mode is deactivated
Delay
by pressing "A".
Press the suction hood Digit and set a speed on
the power bar.
Press the Timer management Digit, which was
displaying "CL" but will change to the count-
down. This is pre-set to 15 minutes.
Timer symbol
After selecting the suction hood Digit, press the
Timer Management Digit to set the countdown.
Grease filter maintenance symbol
The grease filter cleaning signal is displayed by
LED and it is always enabled.
Filter reset and reactivation
After having carried out maintenance on the fil-
ter:
press and hold for 5 seconds. - The LED of the
grease filter will turn off and the countdown will
restart.
Charcoal filter maintenance symbol
The hood is set by default to ducting mode. With
no loads on, press the Hood controls digit to en-
able the suction hood. Press and hold the Digit
again for 5 seconds to:
Activate the charcoal filter:
The charcoal (odour) filter symbol lights up for 1
second.
Deactivate the charcoal filter:
The charcoal (odour) filter symbol flashes twice.
After activation, the icon will light up to indicate
that maintenance must be carried out on the
charcoal (odour) filter.
Reset and reactivation of the charcoal filter
After having carried out maintenance on the fil-
ter:
press and hold for 5 seconds. - The LED of the
anti-odour filter will turn off and the countdown
will restart.
Pasta, soups, braised meat
Rösti (potato fry-ups), omelettes, breaded and fried foods, sausages
Meat, chips
Steak
Boiling water
13. USER MENU
CUSTOMISATION
Before carrying out the procedure, it is advisable to read
the entire paragraph.
– Press
– Press again and hold
– The
key starts flashing.
– Press and hold
dicate
– Hold
areas in clockwise order starting from the left front
one.
The rear left digit alternately indicates
from 2 to 7 indicating the menu code.
The front left digit indicates a number which depends on
the parameters indicated in the selection.
– Press the left rear digit.
– Select a number on the power bar to access the
menu code.
– Press the left front digit.
– Select a number on the power bar to select a value.
See the following table for the specifications:
Menu
Description
code
U2
Key sound volume
control menu.
U3
Countdown beeper
volume
menu.
U4
Display brightness
level control menu.
U5
Countdown display
control menu.
U6
Pan
menu.
U7
Countdown
management menu.
.
for 3 seconds.
: the digits in the cooking area in-
.
and start pressing the digit of the cooking
2
3
1
4
Value
0 - Sound disabled
1 - Min.
3 - Max.
0 - Sound disabled
control
1 - Min.
3 - Max.
0 - Max.
9 - Min.
0 - Countdown display dis-
abled
1 - Countdown display en-
abled
detection
0 - Enabled
1 - Disabled
end
0 - Continuous flashing and
shut-down
1 - Ten flashes and shut-
down
2 - One flash and shut-down
and a number
27