Led Indicator Status - Jatrhg LZ-32-P Manual Del Usuario

Insert the type 2 plug in to the car charging port to

connect.
4.7 Stopping Charging
You have the following options to stop charging:
The JATRHG electric vehicle charging station will automatically stop charging

when the battery is fully charged;
If you have set a Timer, the JATRHG electric vehicle charging station will stop

charging when the Timer countdown ends.
You can also actively unplug the charging gun to interrupt charging.

You can use Emergency Stop Button to stop charging.

-
、
After finishing charging, please unplug the electric vehicle charging gun from the car
and place it into the cable holder, then turn off the power.
In the event of a critical error, smoke emission, or fire, the device must be
immediately shut down.
To perform an emergency stop, turn off the charging station by Emergency Stop Button.
If there is smoke or fire, promptly alert emergency services and, if possible, attempt to
extinguish the fire using only materials suitable for electrical fires up to 1000 V, such as
powder or CO2 fire extinguishers, or sand.
EN

4.8 LED Indicator Status

The LED indicators on the JATRG charging station utilize various colors and brightness
levels to display the current status, allowing you to intuitively understand the current
state based on the status lights.
LED
White Breathing Light
Green steady Light
Blue light flowing
Blue steady light
Yellow steady light
4.9 Fault mode and error code
When the system encounters a fault, it enters fault mode. In this mode, the LED yellow
light remains on, and an error message is displayed on the screen.
During the use of the charging station, health and safety requirements for electrical
equipment will be adhered to.
Unauthorized interventions are strictly prohibited;
Only qualified personnel are permitted to conduct operations.
Failure to comply with this directive can result in electric shock,
which may be fatal or cause serious injuries.
Information
Power On
Power on, charging gun connected,
waiting for charging.
Charging
Charging complete
fault mode
EN