Publicidad
Idiomas disponibles
Idiomas disponibles
Description
Error code
Self-Check Anomaly
01
Ground Fault Protection Anomaly
02
Leakage Current Protection
03
Under-Voltage Protection
04
Over-Voltage Protection
05
Temperature Protection Anomaly
06
Relay Sticking Protection
09
Communication Anomaly
10
Connection Anomaly
11
Vehicle-Side Diode Circuit Break
12
Charging Current Anomaly
13
5. Maintenance and Support
5.1 MAINTENANCE
Although the JATRHG charging station is designed to be maintenance-free, it is
advisable to periodically check the condition of the charging station.
Always disconnect the electrical power to the charging station before inspecting
its condition.
JATRHG Condition Checklist:
Ensure that the plastic casing is not damaged (cracks, defects, or any other imperfections);
Ensure that the electrical insulation of the supplied charging cable is intact;
Ensure that the housing of the type 2 connector is intact;
Ensure that the pins of the type 2 connector are not bent, oxidized, or contain impurities (e.g.,
dust, dirt);
Ensure that there is no water left inside the rubber protective cap of the pin;
EN
If any defects are observed, immediately stop using the charging station
and contact the manufacturer or local supplier.
To avoid damaging the charging cable and type 2 connector, when not in use, wrap the
charging cable around the charger.
If necessary, use a dry cloth to remove any traces of dust, dirt, or water droplets from
the plastic housing of the charging station. Do not use cleaning solvents or water to
clean the JATRHG charging station.
5.2 Support and After-sales Service
For more information, inquiries, or additional services, please contact us as follows:
By email:
service@jatrhg.com
Online chat:
www.jatrhg.com
Telephone:
(+33) 01 84 18 10 10
EN
Publicidad
