Publicidad
Idiomas disponibles
Idiomas disponibles
ABOUTTHEREMOTE
CONTROL
inserting batteries
Detach the battery cover on the rear of the remote control and
insert two R6(size
AA) batteries.
R6(AA)
When to replace the batteries
The maximum operational distance between the remote control
and
the sensor
on the unit should
be approximately
5 meters
(16 feet), When this distance
decreases,
replace the batteries
with new ones.
Using the remote control
The instructions
in this manual refer mainly to the buttons on the
main unit. Buttons
on the remote control with the same names
as those on the main unit can be used as well.
If the unit is not going to be used for an extended
period of
time,
remove
the batteries
to prevent
possible
electrolyte
leakage.
The remote control may not operate
correctly
when:
- The line of sight between
the remote control and the remote
sensor in the display window is exposed to intense light, such
as direct sunlight.
- Other remote controls
are used nearby
(those of television,
etc.)
BEFORE OPERATION
POWER
TAPE MONITOR
VOLUME
Function indicators
PHONES
FRONT SPEAKERS A, B
Function
buttons
To
turn
the
unit, on
Press one of the function buttons (TUNEFI, PHCINO,
AUX,
CD,
VIDEO
1/5.1
CH,
VIDEO
2
or
VIDEO 3) or the TAPE MONITOR button.
When pressing
the TUNER
button, the previously
tuned
station is received
(Direct Play Function).
The POWER
button is also available.
Operation
is possible
after four seconds,
while the VOL
(volume)
level or function
name is displayed
one after the
other and the selected
function
indicator
flashes.
To
select the front speaker system
To use speaker
system A: Set the FRONT SPEAKERS
A button
to sON.
To use speaker system B: Set the FRONT SPEAKERS
B button
to sON.
To use both speaker
systems:
Set both the buttons to ~ ION.
Set the button(s)
tc) aOFF
to turn off the speaker
system(s).
As the front speaker
systems
A and B are connected
in series:
- The sound will be slightly decreased
when using both speaker
systems
- No sound can he heard if the FRONT SPEAKERS
A i~nd [3
buttons
are set to -ON
when only one speaker
system
is
connected
Using the headphones
Connect headphones
to the PHONES jack with a standard stereo
plug (06.3 mm, 1/4 inch). Be sure to set the FRONT SPEAKERS
A and B buttons to 10FF.
Otherwise
sound is output from the
speakers.
m
The
5.1 CH function,
Dolby
Pro Logic
or DSP system
is
automatically
canceled
when the headphones
are plugged
in.
To turn the unit off,
press the POWER
button.
ENGLISH 16
Publicidad
