Publicidad
Idiomas disponibles
Idiomas disponibles
CUSTOM AUDIO ADJUSTMENT"
MU+NG
BALANCE
VOLUME CONTROL
Turn the VOLUME
control
on the unit, or press the VOLUME
buttons on the remote control.
The volume
level is shown
on the display
for four seconds.
It
can be adjusted
between
O and MAX (31). It flashes when being
set over thp level 21.
The volume
level remains -memorized
even after the power is
turned off. However,
if the power is turned off when the volume
is set to more than 17, it is automatically
set to 16 the next time
the power is turned on.
To adjust the Ieft/right balance of the front speakers
Press the BALANCE
button to display
"L/R
OdB. Then press
the DOWNV
or UPA button repeatedly
within four seconds.
~
Note that the front speakers
balance
of the 5.1 CH and Dolby
~'
Pro Logic modes is also changed.
t
,.
To mute the sound temporarily
Press the MUTING
button (-20 dB).
"MUTE
ON" appears
on the display
for four seconds.
While
muting the sound, the selected
function
indicator
flashes.
Press
the MUTING
button again to restore the sound.
SUPER T-BASS SYSTEM
The T-BASS
system
enhances
the realism
of low-frequency
sound.
Press the T-BASS button.
Each time it is pressed,
the level changes.
Select
one of the
three levels, or the off position to suit your preference.
m'
Low-frequency
sound may be distorted when the T-BASS system
is used for a disc or tape
in which
low-frequency
sound
is
originally
emphasized.
In this case, cancel the T-BASS system.
SOUND ADJUSTMENT
DURING
RECORDING
The output
volume
and tone of the speakers
or headphones
.
may be freely varied without affecting
the level of the recording.
/-
,'
Publicidad
