Publicidad
Idiomas disponibles
Idiomas disponibles
Button /
Function / Display
Display
22
Selection of automatic preparation programmes according to symbols
23
Shake reminder
By pressing the Start button 16 or pulling out a frying basket 4 you can
•
interrupt the preparation process at any time.
By pressing and holding the button 17 you can stop the preparation
•
process and switch off the product.
1. Connect the power plug to the mains.
A beep sounds and all the elements of the control panel light up for about 1 second. The
On/Off button 17 then lights up permanently in red.
2. Press the On/Off key 17.
A signal tone sounds and the function keys and symbols on the control panel 1 light up
white. The displays 9 + 10 show "000".
The following operation is described for the left frying basket (frying basket 1).
A signal tone sounds each time the button is pressed.
3. Pull the frying basket 4 out of the housing 2 by the handle 5.
4. Fill the frying basket 4 with the food to be prepared.
5. Slide the frying basket 4 into the housing.
6. Press the button 21 to activate the setting for the left frying basket.
The 21 button flashes. The display 9 shows the temperature and preparation time
alternately and for about 5 seconds each.
7. Press the Menu button 18.
The left-hand symbol of the menu selection 22 flashes and the display 9 shows the
temperature and preparation time alternately and for about 5 seconds each.
8. Select the desired symbol in the menu selection 22 by pressing it several times
(proceeding from left to right).
The selected symbol flashes on the control panel.
The display 9 alternately shows the stored temperature and preparation time for about
5 seconds each.
You can adjust the temperature and time if necessary. Determine the required
preparation time for the respective ingredient (see chapter "Manual temperature
and time setting").
86
Publicidad
