Linsar AF2-40D06 Manual Original página 87

9. Press the button 16.
The preparation process starts. The display1 9 shows the temperature and the
remaining preparation time alternately and for about 5 seconds each.
The control panel shows the symbol of the active menu selection and all the functions
that can currently be used.
When the preparation process is halfway through, a beep sounds and the shake reminder
23 lights up (unless the "muffin symbol" has been selected in the menu selection 22 ).
10. Pull out the frying basket 4 and shake it.
The preparation process is automatically interrupted.
If you do nothing, the preparation process continues completely. The shake reminder
23 is still displayed.
11. Push the frying basket 4 into the housing.
The preparation process continues automatically.
The shaking reminder 23 goes out.
After the time has elapsed, a beep sounds and the preparation process ends. The On/Off
button 17 lights up red.
12. Remove the frying basket 4.
13. Disconnect the product from the mains when all operating sounds (hot air blower
running) have stopped.
Manual temperature and time setting
You can set the preparation time and temperature manually. This is also possible
during the preparation process.
Press the button 21 or 13.
-
Press the 7 and 8 buttons to set the temperature in 5 °C steps.
-
Press the buttons 11 and 12 to set the preparation time in minute steps.
-
Cooking times, temperatures and quantities
These additional cooking times, temperatures and quantities are only indicative. They
may vary depending on the nature of the food being cooked.
Chicken leg
Whole chicken
Steak
Fish
Bacon
Quantity Time
(g) (min.)
500 20
500 36
200 14
500 20
200 12
87
Temperature
(°C)
180
180
180
180
180