JOCCA 2335 Manual De Instrucciones página 9

HOW TO USE
A: MIST BUTTON
1. Press the "Misting" button to turn the ultrasonic mist on or off. Adjust the mist
volume (Maximum-Medium-Minimum) by pressing the "Misting" button several
times.
2. When the mist function is selected, the indicator light on the water tank will light
green.
3. If the water tank is empty (or lacks water), the water indicator light will turn red.
4. Mist function and fan function can be used independently or together.
B: TIMER BUTTON
Press the "Timer" button when the fan is on. The indicator will show the time
remaining until the fan turns off. You can select the length of time the fan will
run between 0.5 and 7.5 hours in 0.5 hour increments. Press the "Timer" button
repeatedly and the sum of the lights values will be the remaining time until it turns
off.
C: WIND SPEED BUTTON
1. Press the "ON/OFF" power button to turn on the fan.
2. Set the fan speed among three options (Low-Medium-High) by pressing the
"WIND SPEED" button several times. The LED light will show low speed, medium
speed and high speed respectively.
REMOTE CONTORL
1. Remote control signal receiver.
Indicator lights:
2.Normal Mode
3.Night Mode
4.Nature Mode
5. Timer: 0.5H/1H/2H/4H
6. Low-medium-high speed
7.Oscillation
8.Maximum nebulization
9. Medium nebulization
10. Minimum misting
Control buttons:
A. Nebulization
B. Timer
C. Wind speed
D. Mode
E. ON/OF button
F. Oscillation
English EN
9