Publicidad
Idiomas disponibles
Idiomas disponibles
manufacturer or any competent person appointed by them. The shelf life is not a substitute for periodic verification (minimum annually) which will assess the condition
of the product.
➪ TO FIND YOUR LOCAL ANNUAL REVIEW CENTRE, VISIT WWW.DELTAPLUS.EU.
No modification or addition or repair of the PPE may be made without prior written consent from the manufacturer nor without using their procedures. Repairs may
only be executed by the manufacturer or a person authorized by the manufacturer strictly following the instructions for repair. Do not use beyond the area of use
defined in the instructions for use. The manufacturer cannot be held liable for any direct or indirect accident after a modification or use other than that provided in
this manual. Do not use this equipment beyond its limits.
Inspect thoroughly before each use. To ensure its working condition and therefore the safety of the user, the product must be checked systematically:
1 / visually inspect the following points: ⑥
- State of the cable: no start of rupture of one or more threads, no folding, no burning, no corrosion or oxidation, no deformation of the cable
stranding.
- Condition of the metal parts: no wear, no deformation, no corrosion or oxidation
- General condition: look for any possible damage due to ultraviolet radiation and other climatic conditions
- In cas of problem/doubt, send back the product to the manufacturer or to a competent person trained by the manufacturer.
- Correct operation and locking of connectors
- That the fall indicator (located on the swivel) is not triggered (the red color should not appear)
- Correct operation of the retractable function and cable or strap lock.
Specific conditions such as humidity, snow, ice, mud, dirt, paint, oil, glue, corrosion, wear of the rope, etc.. can significantly reduce the
operation of the fall arrest device.
2 / Remove the product in the following cases:
- Before and during use, if in doubt.
- In case of doubt
- In the case of contact with chemicals, solvents or fuels that could affect operation
- If it has been subjected to stress during a previous fall
- At least every twelve months by the manufacturer or a competent organization, mandated by them.
PERIODIC REVIEW of PPE: An examination must be performed at least every twelve months by the manufacturer or a competent organization, mandated by them.
This very important check is related to the maintenance and efficacy of the DEVICE and hence the user's safety. A written document authorising reuse should be
obtained during this audit in order to reuse the DEVICE. This document will clarify that the user's safety is linked to maintaining the efficiency and resistance of the
equipment. Replace the PPE if necessary. Repair or replace the DEVICE if necessary; repairs shall only be done by the manufacturer or by a person/entity
authorized by the manufacturer. (see 4.0)
Warning: In accordance with regulations, the identification form must be completed prior to the first use of the product and then updated and kept
with the product as well as the manual by the user.
The legibility of the product labelling should be checked periodically.
RECORD CARD :
1/Reference of the product
2/Company
3/User Name
4/The batch number,/Serial N°
5/Production date
6/Date of 1st Use
7/Purchase date
8/Date of inspection
9/Comments
10/Date of next inspection
11/Name & Signature
12/Type Personal protective equipment
13/RETRACTABLE TYPE FALL ARRESTER (according to Z359.14, Z259.2.2).
14/The record card must be completed by the user before the product is first used, then regularly updated and kept. To be exclusively used as described in the product
user instructions.
15/The frequency of inspections must comply with national regulations and in any case an inspection must be performed at least once a year. The documentation
supplied with each product must be kept indefinitely by the user.
3.1 Storage/Cleaning instructions
STORAGE INSTRUCTIONS:
During transport and storage: - keep the product in its packaging /-keep the product away from any sharp, abrasive, objects etc... / Keep the product away from
sunlight, heat, flames, hot metal, oil, petroleum products, harsh chemicals, acids, dyes, solvents, sharp edges and structures of small diameter. These items can affect
the performance of the fall arrest device. Store the equipment dry and clean in its original packing, away from light, cold, heat and humidity and at ambient
temperature.
INSTRUCTIONS FOR CLEANING / MAINTENANCE:
Clean with soap and water, wipe with a cloth and hang in a ventilated area to dry naturally away from any direct fire or source of heat, even for items that got wet
during use. Do not use bleach, harsh detergents, solvents, gasoline or colouring, these substances can affect the performance of product. ▪ The metal parts are wiped
ARA ANSI CSA UI 3 LANGUAGES EN ES FR 07 12 2020
DATE : 07.12.2020
6/22
B.P. 140 - ZAC de La Peyrolière
84405 APT CEDEX – FRANCE
Publicidad
