Publicidad
Idiomas disponibles
Idiomas disponibles
Step 3. CHECK DOOR BALANCE
With another person holding the dishwasher to prevent it from tipping,
open the door slowly.
•
If the door drops too freely , increase the spring tension.
•
If the door closes
To adjust the spring tension:
1.
Grasping the spring firml , raise or lower the hook end to the next
higher or lower slot, and then insert the hook into the slot.
NOTE: Adjust both springs (left-hand side and right-hand side) to the
same tension.
Need to Add"
2.
Retest the door. Continue moving the spring hooks higher or lower
until the door is balanced.
Step 4. ADJUST LEVELING LEGS
1.
Move the dishwasher close to the installation location and lay it on its
back.
2.
Measure the height of the opening from the underside of countertop to
floor (l west point).
,
decrease the spring tension.
too hard
Failure to do so could result in do r leaks
o
"
13
Publicidad
