Publicidad
Idiomas disponibles
Idiomas disponibles
Tighten the compression nut until snug. Do not overtighten.
3.
4.
Place a paper towel under elbow, and then turn on the water supply to
check for leaks.
CONNECT TO HOUSE DRAIN SYSTEM
Connect the drain hose to the waste tee or garbage disposal using one
1.
26
of the following methods.
•
Option 1 – Garbage Disposal - With Air Gap
•
Option 2 – No Garbage Disposal- With Air Gap
•
Option 3 – Garbage Disposal - No Air Gap*
•
Option 4 – No Garbage Disposal - No Air Gap*
*an air gap is recommended
IMPORTANT:
•
Always use a new drain hose when installing a new dishwasher.
•
Total drain hose length must not exceed 10 ft (3.05 m), for proper drain
operation.
•
To minimize the noise caused by vibration when using the dishwasher,
route the drain hose so that it avoids contact with the floor and th
edge of the hole in the cabinet through which the hose passes.
NOTE: After installation, the elbow
face the dishwasher card slot at the right
on the bottom.
should
Publicidad
