Descargar Imprimir esta página

Midea MDF24P1B Serie Instrucciones De Instalación página 31

Ocultar thumbs Ver también para MDF24P1B Serie:

Publicidad

Idiomas disponibles

Idiomas disponibles

Option 4 – (No Garbage Disposal - No Air Gap):
IMPORTANT: If you need to cut the drain hose to fit the diame er of
the connection, cut only the rubber end of the hose, as shown earlier in
this section (do not cut into the ridged section).
1.
Attach drain hose to waste tee with 1
clamp*.
NOTES:
This connection must be located before the drain trap and at least 20"
(50.8 cm) above the floor whe e dishwasher will be installed.
It is recommended that the drain hose be looped up and securely
fastened to the underside of the counter at a minimum height of 32"
(81.3 cm).
e
d
*Parts available from local plumbing supply store.
SECURE DISHWASHER
IMPORTANT: The dishwasher must be secured to adjacent cabinets to
keep it from tipping when the door is opened.
Follow the instructions to install mounting brackets in the manner
30
required for your installation method. You will secure the dishwasher after
it is connected to the utilities and moved into the opening.
WARNING
Excessive Weight Hazard
Use two or more people to move and install dishwasher.
Failure to do so can result in back or other injury.
a
b
c
1/2
" to 2" (3.8 to 5 cm) screw-type
a
Drain Hose -
Cut Here if
Needed
b
Screw-Type
Clamps
c
Drain Hose
d
Drain Trap
e
Waste Tee
32"
18"
Min.
Min.

Publicidad

loading

Este manual también es adecuado para:

Mdf24p2b serie