Publicidad
Idiomas disponibles
Idiomas disponibles
Fanaway LUNA Installation Instructions
WARNING: To avoid possible electrical shock, be sure you have turned off the power at the main circuit
panel.
Follow the steps below to connect the fan to your household wiring. Use the wire connecting nuts supplied
with your fan. Secure the connectors with electrical tape. Make sure there are no loose wire strands or
connections.
Fig. 12a
ELECTRICAL WIRING DIAGRAM
9.
Turn the connecting nuts upward and push the wiring into the
outlet box.
10. Carefully insert the Remote Receiver above the hanger ball in the
remainder spacing in the mounting bracket. Take care not to damage or
loosen any of the wiring.
Fig. 12b
1.
Connect the household live supply wire
(black) to receiver input wire (black, AC IN L)
as shown in Fig. 12.
2.
Connect the household neutral supply
wire (white) to the receiver input wire (white,
AC IN N).
3.
Connect the household ground wire to
the fan bracket ground wire (green) and fan
body ground wire.
4.
Connect the reveiver output wire (black,
TO MOTOR L) to motor live input wire (black,
TO MOTOR L).
5.
Connect the receiver output wire (white,
TO MOTOR N) to motor neutral input wire
(white, TO MOTOR N)
6.
Connect the receiver output wire (blue,
FOR LIGHT) to fan light live input wire (blue,
FOR LIGHT)
7.
Pull the metal safety cable on the
security hook, tight the safety cable (Fig.12a
& Fig.12b)
8.
After connecting the wires, spread them
apart so that the green and white wires are on
one side of the outlet box and the black and
blue wires are on the other side.
9 | P a g e
Publicidad
