GreenWorks Commercial UTV 800 Manual Del Usuario página 19

Console
Direction Selector Switch
When the direction selector is in the center position, the vehicle is in gear. The vehicle will not move
if the accelerator pedal is depressed.
Push the top of the switch to choose forward operation. Push the bottom of the switch to choose
reverse operation. If the switch is changed while the accelerator pedal is depressed, the vehicle will
not move in the new direction until the pedal is released, then depressed again.
Tip: The malfunction light will illuminate after reversing direction if you fail to release the throttle
pedal after changing the switch.
Lighting Switch
Lighting switch
a.
The distance light switch
b.
c. Two four-wheel drive switch
Front axle differential switch
d.
Emergency lights switch
e.
Left & right change Switch
f.
Steering gear switch
g.
Steering mode switch
h.
Cigar lighter
i.
Winch switch
j.
k. USB port
Switch Functions
2WD/4WD operation of switch and front axle differential operation of switch:
When 2WD/4WD switch is set to the 2WD position, the vehicle keeps 2WD status; At this moment,-
front axle differential switch doesn't work.
When 2WD/4WD switch is set to the 4WD position, the vehicle keeps 4WD status; At this moment,if
front axle differential switch is set to the Front axle differential unlock position, the front differential
has its diff lock unlocked,two front wheels work respectively.The rear axle differential in the vehicle
keeps unlocked, two rear wheels always works respectively.
FEATURES AND CONTROLS
19