GreenWorks Commercial UTV 800 Manual Del Usuario página 25

The accelerator pedal will function only when the key is ON and the direction selector switch is
set to either forward or reverse. To begin moving or to increase vehicle speed, gradually push the
accelerator pedal toward the floor. Holding the accelerator pedal down continuously will accelerate
the vehicle to the maximum speed.
To slow the vehicle, release the accelerator pedal.
Electric motor braking provides braking when the pedal is released. For additional speed control or
to stop the vehicle, apply the service brakes.
Roll-Over Protective Structure
Understand completely and learn to use the safety devices (roll-over protective structure, seat
belts), and never change original safety devices. If safety devices are damaged, consult your local
dealer for replacement. Always use seat belts.
Roll-over protective structure
a.
Seat belts
b.
FEATURES AND CONTROLS
25