GreenWorks Commercial UTV 800 Manual Del Usuario página 42

MAINTENANCE
Gear cases
Front Gear case
Always check and change the front gear case oil at the intervals outlined in the Periodic
Maintenance Chart. Maintain the oil level even with the bottom thread of the fill plug hole.
Refer to the Gearcase Specifications Chart for recommended lubricants, capacities and torque
specifications.
Oil Check
The front gear case fill plug is located on the left side of the
front gear case.
1. Position the vehicle on a level surface.
2. Remove the fill plug. Check the oil level.
3. Add the recommended oil as needed.
4. Reinstall the fill plug. Torque to specification.
Fill Plug
Fill Plug
Oil Change
1. Support the vehicle securely with a jack stand.
2. Remove the front tire on the driver's side.
3. Remove the fill plug.
4. Place a drain pan under the drain plug.
5. Remove the drain plug. Allow the oil to drain completely.
6. Clean the drain plug. Reinstall the drain plug. Torque to
specification.
7. Add the recommended oil.
8. Reinstall the fill plug. Torque to specification.
9. Check for leaks.
10. Discard used oil properly.
Drain Plug
42