Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Never drive mower with the neutral bypass lever
disengaged. Always engage the neutral bypass lever
to the original position before driving! Failure to
engage the lever could cause serious damage to your
mower and void mower warranty!
Never unlock the neutral bypass levers when the
mower is on a slope. Once the levers are released,
the mower can roll freely and does not have a brake.
Releasing the lever on a slope could lead to loss of
control and increase the risk of serious personal injury.
8.4
MOVE THE MOWER MANUALLY
To push the mower manually:
1. Disengage the blades and push the steering control
levers outward to engage the parking brake.
2. Turn the start key to the OFF position. Remove the
start key, and wait for all moving parts to stop before
leaving the operating position.
3. Return the steering control levers to the NEUTRAL
position then unlock the neutral bypass levers to
disengage the drive system.
4. Move the mower to the desired location.
To avoid damage to the motor and drive system,
do not move the product faster than 5 mph (8
km/h).
5. Immediately after moving the mower, lock the
neutral bypass levers.
9
CLEAN AND STORAGE
WARNING
WARNING
CAUTION
English
9.1
CLEAN THE PRODUCT
•
Remove any build-up of grass and leaves on or
around the motor cover (Do not use water).
•
Occasionally wipe the mower clean with a dry cloth.
•
If debris builds up on the underside of the mower
during use, stop the motor on level ground,
disengage the blades, set the parking brake, shut
off the product, remove the start key and use the
compressed air to clean the area.
9.2
STORE THE PRODUCT
The following steps should be taken in order to prepare
the product for storage.
•
Clean the Mower: Before storing the product,
thoroughly clean it as outlined in the previous
section.
•
Blade Inspection and Maintenance: Inspect the
blades and replace them as detailed in the Service
the Mower Blades (Reference 10.7) section if
needed.
•
Avoid Corrosive Materials: Keep the mower away
from corrosive substances, such as fertilizer or rock
salt, as these can lead to rust and corrosion on
metal components like the blade, deck, motor, and
frame. Keep the mower and its battery away from
conductive or corrosive materials to reduce the risk
of short circuit, fire, explosion and other electrical
hazards.
•
Children Safety: Store the product in a location
inaccessible to children to prevent accidents.
•
Proper Covering: Do not cover the product with
a solid plastic sheet. Plastic coverings can trap
moisture, which causes rust and corrosion.
•
Check for Wear and Tear: Thoroughly inspect the
mower for any worn or damaged parts that may
require replacement.
•
Tire Maintenance: Avoid deflating the tires during
storage.
•
Storage Environment: Store the product in a well-
ventilated, clean, and dry area. Note that the battery
charger cannot be used in a wet environment.
•
Charging Process: Refer to the Charging
(Reference 10.3) section and also the Battery
Charger Manual for comprehensive instructions on
using the charger and effectively charging the
battery.
Note: By adhering to these guidelines, you can help
increase the longevity of your mower during periods of
storage.
28
Publicidad
