CLEANING
It is recommended to clean the dryer regularly, avoiding the progressive accumulation of dust inside
which can damage the internal components or reduce performance of the appliance.
It should be cleaned at least every 6 months.
To clean the internal parts of the appliance, the power must be disconnected or it must be removed
from its location on the wall ('plug-in').
First, the casing must be removed to access the internal parts.
The casing should be cleaned using a soft cloth dampened with a soap solution. Then dry it with a soft,
dry cloth.
The front or lower air inlet must be cleaned in a similar way, ensuring that the slots are free of dust and
matter that may hinder the appliance's suction.
The sensor shield or screen should be cleaned with a soft cloth, slightly dampened with soap and
water. Then dry it.
Dust residue inside the appliance should be carefully removed with a soft-bristled brush, taking
special care to ensure that the air access area inside the motor is completely free of dirt.
The air filter should be replaced regularly, as indicated in the corresponding section of this manual.
IMPORTANT
Rubbish bin with strikethrough meaning:
Do not dispose of electrical devices in unclassified household rubbish. They must be
disposed of in collection facilities intended for this purpose.
Please contact your local county council for information on available collection systems.
By disposing of electrical devices in landfills or dumps, the hazardous substances they contain can
seep into groundwater and become part of the food chain, which can endanger your health and
wellbeing.
When replacing old devices with new equipment, the seller is required by law to pick up the
equipment to be replaced and dispose of it free of charge.