INSTALLATION
Note
The dryer must be installed on a compact, enclosed surface.
Minimum height with respect to a shelf below must be no less than
H = 400 mm.
Recommended heights
It is suggested to install the appliance at a height that enables convenient access and use.
MAINTENANCE
Control electronic circuit: Main components and connections. Regulation and adjustments.
The following diagrams show the location and main elements that make up the control electronic
circuit.
2
1
5
4
3
7
6
10
H= 1040 mm
H= 780 mm
(40 15/16")
(30 45/64")
8
9
1.
Motor cable strip
2.
Heat resistance cable strip
3.
Power cable strip
4.
Connector ion/ozone generator cables
5.
UVC LED cable connector
6.
Detection distance setting
7.
LED IR/Informative LED cable connector
8.
LED Motor Mode
9.
Motor mode regulation
10.
Heating resistance disconnection switch